|
|
|
|
Product
Info • Technical
Data
Installation Instructions
MSDS:
USA: English
/ Spanish
• Canada: English
/ French
|
HENRY
663 Indoor/Outdoor Carpet Adhesive
-
Water-Resistant
-
Strong
Initial Grab
-
No
Open Time Required
-
Long
Working Time
-
Excellent
Bond Integrity
-
Excellent
Trowelability
|
|
|
| Typical
Use: |
Traffic
Type: |
| Installation
of indoor/outdoor
carpeting. |
Not
Designated |
| Bonds: |
Bonds
To: |
| Outdoor
carpet (rubber, polypropylene, and non-backed),
Artificial turf, Indoor/Outdoor
carpet - outdoor use only,
Not for use with urethane backed carpet |
Concrete, asphalt
paving and other clean, sound paving surfaces (not asphalt
roofing), exterior or marine grade plywood decking which
is sound and not subject to deterioration (not plank decking
or treated wood), aluminum boat decks which are clean
and roughened, fiberglass which has been roughened, substrates
which have been painted, stained, or otherwise coated
must be tested to assure compatibility with the adhesive. |
|
Warranty:
|
|
|
Back
to Top
|
TECHNICAL
DATA
| Base: |
Water-based/rubber-resin |
| Color: |
Tan |
| Taggant
Color: |
Yellow/Orange |
| Open
Time: |
None
- lay in immediately |
| Working
Time: |
70
minutes NOTE: Working times vary based on job conditions,
substrates, temperature and humidity. |
| Size: |
Quart,
Gallon, 4 Gallon |
| Shipping
Unit: |
Quart:
12 quarts/ctn
Gallon: 4 gallons/ctn
4 Gallon: 1 pail |
| Weight
Per Gallon: |
10.4
lbs |
| Quantity
Per Pallet: |
Quart:
40 ctns
Gallon: 30 ctns
4 Gallon: 48 pails |
| Shelf
Life: |
One
year if not opened |
| Freeze-Thaw
Stable: |
To
10°F (-12°C) - Avoid low temperatures or multiple
freeze-thaw cycles |
| UPC
Information: |
Quart:
0-81833-66330-3
Gallon: 0-81833-66340-2
4 Gallon: 0-81833-66395-2 |
Back
to Top
INSTALLATION
INSTRUCTIONS
|
DIRECTIONS:
Refer to carpet
manufacturer’s specific recommendations. Temperatures
should be 65°F (18°C) or above in areas where
adhesive is to be used. Substrate must be sound, smooth,
dry, clean and free of excessive moisture or alkali.
Remove dirt, wax, loose paint and all other foreign
matter that would interfere with a good bond such
as curing agents and sealers.
- Stir any liquid on
the surface into the adhesive.
- Full spread adhesive
using the recommended trowel. NOTE: Recommended
trowel sizes are guidelines only, and are minimum
requirements. Rough, porous concrete and heavily
textured carpet backings may require deeper notches.
A 100% transfer of adhesive into the carpet backing
while maintaining full coverage of the substrate,
must be obtained.
- Install carpet immediately
into wet adhesive. Do not let adhesive skin over.
- Within 70 minutes,
cut, fit and reposition as recommended by the carpet
manufacturer.
- Roll carpet in both
directions with a 75-100 lb. roller and seal seams
as recommended by the carpet manufacturer. Stiff
carpet should be rerolled in 2 hours.
|
Application
|
Recommended
Trowel
|
Coverage
|
| Indoor/outdoor
carpet and outdoor carpet |
|
90-108 sq. ft.
(10-12 sq yds/gal)
|
Click on the icons above to
calculate the amount of product you need!
CLEANUP:
- Wet
Adhesive: Clean, white cloth dampened with soapy
water.
- Dried
Adhesive: Clean, white cloth dampened with mineral
spirits; carefully following warnings on the container.
WARNINGS:
Carefully read and follow all cautions and warnings
on the product label. Refer to the Material
Safety Data Sheet for additional product information.NOT
INTENDED FOR INTERIOR APPLICATIONS
|
|
|
